28
Turn on the projector
Connecting the projector's AC power cord to an
AC outlet/socket, the power indicator lights up
red, and the open the lens cover
Please press the power button on the rear control
panel or remote control, the power indicator lights
up green, and the cooling fan starts to work, and
the display appears on the screen.
2
3
1
Please complete the connection of the peripheral
devicefirst (with computer and video recorder,
etc.)Before turning on the projector
Attention：
• If you select the “NO” buttononboot screenin the menu,
theboot screenimage will not display on thescreen.
The display disappears
after 5 seconds.
“Power off？”
Turn off the projector
Under normal working conditions, press the POWER
button of the remote control or the rear control
panel, “Power off?” will appear on the screen.
Under the OSD display model, if you press the
power button again, the projector will be turned
off and switch to the standby mode.
Power off？
To Next Page
Loading...
