45
Remote control lock
Off ........ The remote control is not locked.
On ........ The remote control is locked.
AC direct startup
On ........ Plug in the power and turn it on directly.
Off ........ Plug in the power and the startup function is turned off.
Standby mode
This function can be used when operating the projector by the network in standby mode.
Normal ........ Power is still supplied to the network function even after the projector is turned off.
You can turn on and off the projector by the network and change the network environment.
Low power consumption ........ Select the economic mode when not using the projector by the
network. When the projector is turned off, its network function stops.
Test pattern
Display the built-in test image of the projector.
1) Press ▲▼to select [Test pattern].
2) Press the <OK> button.
3) Press ▲▼to switch items.
4) Press the <OK> button.
Grayscale 1 / Grayscale 2 / Grayscale 3 / Grayscale 4 / Color Bar / Red / Green /
Blue / Grid / White / Black / Gray: Use the menu screen to display the test pattern.
Select the test mode to make various adjustments easily.
To Next Page
Loading...
