49
Attention
Please install the filter properly, if you are using the projector without a filter
installed, the projector maybe damaged by dirt or dust
If the filter is damaged and the dirt still exists even after cleaning the filter,
you should be replacea new filter.
Please clean the filter or replace the filter components under
the following condition
When displaying the change information.
The internal temperature of the projector rises
due to blockage, and the warning indicator
lights up constantly, causing the projector
to turn off.
Cleaning cycle shows full 500 hours.
clean filter
Clean cycle 500 Hours
Filter timer 27
Timer Reset
Network
Filter
Information
To Next Page
Loading...
