Accessories and modifications
UPT-640 (as of SW 100) 7
4 Accessories and modifications
A wide range of compatible accessories and peripheral
devices are available for the CIRUS temperature con-
troller UPT-640 (as of SW 100). They allow it to be opti-
mally adapted to your specific heatsealing application
and to your plant's design and operating philosophy.
4.1 Accessories
The products described below are only a few of the
wide range of accessories available for CIRUS tempe-
rature controllers ("Accessories" leaflet).
Analog temperature meter ATR-x
For front panel mounting or mounting on a top hat rail (DIN TS35).
Analog indication of the ACTUAL temperature of the heatsealing band in °C. The
meter damping of the unit is optimized for the abrupt temperature changes that occur
in impulse mode.
Digital temperature meter DTR-x
For front panel mounting or mounting on a top hat rail (DIN TS35).
Digital indication of the ACTUAL temperature of the heatsealing band in °C, with
HOLD function.
Line filter LF-xx480
Essential in order to ensure CE conformity.
Optimized for the CIRUS temperature controller.
Impulse transformer ITR-x
Designed according to VDE 0570/EN 61558 with a one-section bobbin.
Optimized for impulse operation with CIRUS temperature controllers.
Specified according to the heatsealing application
( ROPEX Application Report).
Communication interface CI-USB-1
Interface for connecting a RESISTRON temperature controller with diagnostic inter-
face (DIAG) to the PC (USB port). Associated PC visualization software for dis-
playing setting and configuration data, and for recording SET and ACTUAL tempe-
ratures in real time.
Booster B-xxx400
External switching amplifier, necessary for high primary currents
(continuous current > 5A, pulsed current > 25A).
To Next Page
Loading...
