Ropex CIRUS UPT-640 - Modifications (Mods)

Accessories and modifications
8 UPT-640 (as of SW 100)
4.2 Modifications (MODs)
Owing to its universal design, the CIRUS temperature
controller UPT-640 (as of SW 100) is suitable for a very
wide range of heatsealing applications.
One modification (MOD) is available for the CIRUS
temperature controller UPT-640 (as of SW 100) for
implementing special applications.
MOD 01
Amplifier for low secondary voltages
(U
R
= 0.25…16VAC). This modification is necessary,
for example, for very short or low-resistance heating
elements.
Monitoringcurrent transformer
For detecting frame short-circuits on the heatsealing band.
Used as an alternative to the standard PEX-W2/-W3 current transformer.
Transparent front cover TFA-1
For increasing the degree of protection on the front of the controller to IP65.
Also facilitates applications in the food technology sector (GMP).
Adapter for top hat rail mounting, HS-Adapter-01
For mounting the CIRUS temperature controller UPT-640 (as of SW 100) on a top
hat rail (DIN TS35). Allows the controller to be installed in the electrical cabinet, for
instance, where it is only accessible to authorized persons.
Lockable door TUER-S/K-1
Transparent door (with lock) for mounting on the bezel of the controller. The display
is clearly legible at all times. The keyboard can only be operated, however, by autho-
rized persons in possession of a key.
Measurement cable UML-1
Twisted measurement cable for the U
R
voltage measurement.
Trailing cable, halogen and silicone-free.