Reference Manual
00809-0100-4792, Rev CA
August 2010
Rosemount 1495, 1496
www.rosemount.com
Section 1 Introduction
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 1-2
Product Recycling/Disposal . . . . . . . . . . . . . . . . . . . . . . .page 1-2
USING THIS MANUAL This product manual provides installation and configuration instructions for the
Rosemount 1495 Orifice Plate, Rosemount 1496 Flange Union.
This section contains an explanation of each section of the manual and an
installation checklist.
Section 2: Installation, Location, and Orientation explains initial
inspection, operating limitations, and in what location and orientation to install
the orifice plate and associated hardware.
Section 3: Hardware Installation for Rosemount 1495 Orifice Plate
explains how to install the Orifice Plate in either existing orifice flanges or with
the Rosemount 1495 Orifice Plate.
Section 4: Hardware Installation for Rosemount 1496 Flange Union
explains how to install the 1496 Flange Union.
Appendix A: Specifications and Reference Data supplies reference and
specification data, as well as ordering information.
Appendix B: Recommended Installation Requirements shows the
recommended straight run requirements and bolt torques used for orifice plate
installations.
Appendix C: Calculation Data Sheet
To Next Page
Loading...
