EasyManuals Logo

Rotary R3 AC50 User Manual

Rotary R3 AC50
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TO AVOID CROSS-CONTAMINATION, USE THIS CHARGING STATION ONLY
WITH R134a REFRIGERANT
The charging station was designed to recover, recycle and recharge R134a
refrigerant only.
Do not try to adapt the charging station to another type of refrigerant.
Do not mix different types of refrigerants inside the system or within the same
container; the mixture of refrigerants will cause severe damage to the charging station
and to the vehicle's A/C system.
Only use new lubricant to replace the amount removed during the recycling process.
Used lubricant must be disposed of in compliance with applicable federal, state and
local procedures and regulations.
THE HIGH VOLTAGE CURRENT INSIDE THE CHARGING STATION IMPLIES A
RISK OF ELECTRICAL SHOCK
Exposure could cause personal injuries.
Disconnect the power before performing any maintenance operation on the charging
station.
Further safety and medical information can be obtained from the lubricant and refrigerant
manufacturers.
OPERATING NOTE:
At temperatures above 49 °C / 120 °F, wait 10 minutes between recovery operations.
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotary R3 AC50 and is the answer not in the manual?

Rotary R3 AC50 Specifications

General IconGeneral
BrandRotary
ModelR3 AC50
CategoryService Equipment
LanguageEnglish