11 POWER SUPPLY
The equipment is powered by the mains through a specific power cable.
The equipment must be connected to the mains through the supplied specific power cable; respect
the applicable voltage, frequency and power values.
The voltage, frequency and power values that can be applied can be found on the tag located near
the main switch.
The mains plug must be used to disconnect from the mains.
Do not position the equipment so that it becomes difficult to
disconnect it from the mains.
Do not use extension cords to power the equipment.
Proceed as follows:
1.
Go to the left side of the equipment.
2.
Connect the power cable to the mains via a grounded socket.
29
To Next Page
Loading...