9.2 Transportation Lock Removal
On the equipment there is a screw that blocks the internal tank's oil scales to preserve its integrity
during transportation.
This screw must be removed before starting to use the equipment.
Proceed as follows:
Proceed as follows:
1.
Stand in front of the equipment.
2.
Locate the locking screw.
3.
Unscrew the screw until it is completing removed.
4.
Keep the screw in case it may be needed in the future when transporting the equipment.
If the screw is not removed, the charging station may not work
properly and/or be damaged during use.
26
To Next Page
Loading...