ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Attach the pre-assembled upper coolant hose to the engine using 1 hose clamp
(Pos. 3), see Fig. 11.
Fig. 11
Attach the pre-assembled lower coolant hose to the engine using 1 hose clamp
(Pos. 4), see Fig. 12.
Note: The length of the upper and bottom hose is different, but equal at delivery.
Therefore, cut the bottom hose using scissors or a knife.
Fig. 12
Page 10/53 Edition 07/2016
To Next Page
Loading...
