Rotex Solaris User Manual

7 x Hydraulic system integration
55
FA ROTEX Solaris - 08/2007
1) The swimming pool is heated almost exclusively by means of the solar heating system. Approx. 1.0 kW heat can be transferred per Kelvin excess temperature
in the solar section of the storage tank above the swimming pool circuit.
!) The heat exchanger is manufactured from high-grade stainless steel (1.4404). If the swimming pool water is to be heated directly in the exchanger, the
corrosion resistance must be checked on site. In case of doubt, the systems must be separated.
1) The swimming pool is heated almost exclusively by means of the solar heating system. Approx. 1.0 kW heat can be transferred per Kelvin in the lower section
of the storage tank above the swimming pool circuit.
! The heat exchanger is manufactured of high-grade stainless steel (1.4404). If the swimming pool water is to be heated directly in the exchanger, the
corrosion resistance must be checked on site. In case of doubt, the systems must be separated.
Fig. 7-4 Swimming pool combined with SCS 538/16/16
1)
Fig. 7-5 Wood-fired boiler combined with storage tank and swimming pool
1)
combined with SCS 538/16/16

Rotex Solaris Specifications

General

Brand	Rotex
Model	Solaris
Category	Heating System
Language	English