rotork IQT Series User Manual

The Rotork Setting Tool allows actuator control, indication and protection functions
to be configured to suit site requirements. It is essential that all the actuator
settings are checked for compatibility with the process and control system
requirements before the actuator is put into service. Please read this publication.
When Rotork personnel or nominated agents are contracted to carry out site
commissioning and/or acceptance, documentation of commissioned actuator
configuration can be made available for customer records.

rotork IQT Series Specifications

General

Data Logging	Yes
Housing Material	Aluminum alloy
Type	Electric
Ingress Protection	IP68
Communication Protocols	Foundation Fieldbus, Profibus, Modbus
Control Signal	4-20mA
Ambient Temperature Range	+70°C
Communication	Foundation Fieldbus
Mounting	quarter-turn, linear
Torque Range	10 Nm to 3000 Nm