Page
1
1 Health and Safety 2
3
2 Storage 3
3 Operating your IQ Actuator 3
3.1 Operating by Hand 3
3.2 Operating Electrically 3
3.3 Display – 4
Local Indication
3.4 Display – Alarm Indication 5
4 Preparing Drive Bush 7
4.1 Bases F05 to F07 7
and FA05 to FA07
4.2 Bases F10 to F14 7
and FA10 to FA14
4.3 Machining the Drive Bush 7
4.4 Fitting the Drive Bush 7
5 Mounting the Actuator 8
5.1 IQT Actuators 8
5.2 IQTM Actuators 8
5.3 IQTF Actuators 8
5.4 Lifting the Actuator 8
5.5 Securing Actuator to Valve 8
5.6 Stop Bolts 9
6 Cable Connections 10
6.1 Earth/Ground Connections 10
6.2 Removing Terminal Cover 10
6.3 Cable Entry 10
6.4 Connecting to Terminals 10
6.5 Replacing Terminal Cover 10
7 Commissioning 11
7.1 The Setting Procedure 11
7.2 The Setting Tool 12
7.3 Entering the Actuator 13
Setting Procedure
7.4 Setting Mode – Password 13
7.5 New Password 13
7.6 Checking Mode 13
7.7 Procedure Branch – 14
Crossroad
7.8 The Actuator Display – 14
Setting/Checking Mode
7.9 Returning to Valve 14
Position Display
8 Commissioning –
Primary Functions 15
Primary Functions Contents 16
9 Commissioning –
Secondary Functions
25
Secondary Functions Contents 27
Default Options 60
10 Maintenance, Monitoring
and Troubleshooting
62
10.1 Help Screens 64
10.2 IrDA Diagnostics & Configuration 69
11 Weights and Measures 71
Binary, Hexadecimal and Decimal 72
Conversion Table
12 IQ Approvals 73
CONTENTS
Page Page
To Next Page
Loading...
Need help?
General
