RTS BKP-4 - Front Panel Description

1-2 User Instructions MKP-4, BKP-4, WKP-4, TKP-4, and MKP12 Keypanels
FRONT PANEL DESCRIPTION
1 Intercom Keys: Assignable for several types of operation, including talk only, listen only, talk
with auto-listen, and all-call (where activating the key also activates all keys to the left of that
key). Keys feature momentary or latching operation. For momentary operation, the operator
presses and holds a key while communicating, then releases it when finished. For latching
operation, the operator taps a key to turn it on, then taps it again to turn it off. Latching can be
disabled via an options switch (12) or from ADAMedit or ZEUSedit.
2 Key Indicators: Two bi-color (red and green) LED indicators for each key. Provide indications
for talk on/off, listen on/off, incoming call, busy (for keys assigned to talk to IFB's), and in-use
(for keys assigned to talk to either IFB's or ISO's).
3 Designation Strip Holder: Holds printed strip identifying key assignments. Works with
ADAMedit and ZEUSedit designation strip print feature.
4 Call Waiting Display and Response Key: 4-character, alphanumeric display for incoming
caller names. Talkback to caller via the response key. The call waiting window and response
key are also used with the copy, clear, and scroll keys (5).
5 Copy, Clear, and Scroll keys: Used for key and setup page assignment. Can also be used to talk
to any location in the intercom system when no intercom key is assigned. (Note: There are 4
setup pages. Each contains a complete set of key assignments.)
6 Headset On/Off Key with Indicator. When the headset is on, the speaker output and panel mic
are off.
7 Listen Volume Control for Headset or Speaker.
8 Panel Mic Connector: 1/4", 3-conductor phone jack. Accepts MCP5 or MCP6 Panel
Microphone.
9 Monaural Headset Connector: A4F (XLR-4F) connector. Accepts any RTS headset with A4M
(XLR4M) connector. Also accepts monaural headphones for use with a panel microphone, or
accepts a handheld microphone for use with the speaker