Publication date: Jan., 2009
Revision A1
137
Function name:
Storm
Function description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Fig. 3-83
Parameter description:
Storm Type:
Disable:
Disable the function of the bandwidth storm control.
BC (Broadcast Storm Control):
Enable the function of bandwidth storm control for broadcast
packets.
UC (Unknown Unicast Storm Control):
Enable the function of bandwidth storm control for unknown unicast
packets. These packets are the MAC address that had not
completed the learning process yet.
BC, UC (Broadcast, Unknown Unicast Storm Control):
Enable the function of bandwidth storm control for broadcast and
Unknown Unicast Storm packets in transmission
To Next Page
Loading...
Need help?
General
