Publication date: Jan., 2009 203
Revision A1
set applicant
Syntax:
set applicant <range> <normal|non-participant>
Description:
To set default applicant mode for each port.
Argument:
<range>: port range, syntax 1,5-7, available from 1 to 26
<normal>: set applicant as normal mode
<non-participant>: set applicant as non-participant mode
Possible value:
<range>: 1 to 26
<normal|non-participant>: normal or non-participant
Example:
ES-2410C (gvrp)# set applicant 1-10 non-participant
set registrar
Syntax:
set registrar <range> <normal | fixed | forbidden>
Description:
To set default registrar mode for each port.
Argument:
<range>: port range, syntax 1,5-7, available from 1 to 26
<normal>: set registrar as normal mode
<fixed>: set registrar as fixed mode
<forbidden>: set registrar as forbidden mode
Possible value:
<range>: 1 to 26
<normal|fixed|forbidden>: normal or fixed or forbidden
Example:
ES-2410C (gvrp)# set registrar 1-5 fixed
set restricted
Syntax:
set restricted <range> <enable | disable>
Description:
To set the restricted mode for each port.
Argument:
<range>: port range, syntax 1,5-7, available from 1 to 26
<enable>: set restricted as enabled
<disable>: set restricted as disabled
Possible value:
<range>: 1 to 26
<enable | disable>: enable or disable
To Next Page
Loading...
Need help?
General
