1. Product Overview
RuggedCom® RuggedBackbone™ 7 RX5000 Installation Guide Rev 107
1. Product Overview
1.1. Functional Overview
The RuggedBackbone™ RX5000 is a high-port density routing and switching platform, designed
to operate in harsh environments. The RX5000 can withstand high levels of electromagnetic
interference, radio frequency interference, and a wide temperature range of -40°C to +85°C. The
RX5000 is designed to meet the challenging climatic and environmental demands found in utility,
industrial, and military network applications.
The RX5000’s superior hardware design, coupled with the embedded ROX™ operating system,
provides improved system reliability for the most demanding network applications. The cyber security
and networking features make it ideally suited for creating secure Ethernet networks for mission
critical, real-time, control applications.
The RX5000 is a scalable, modular platform providing the the ability to change the
RuggedBackbone™ as the network grows and needs change.
The RuggedEnclosure™ is rated for IP65 ingress protection, meaning that it is dust tight and can
withstand water from a nozzle in any direction. Constructed with aluminum extrusions with fins on
both sides and combined with high reliability internal circulation fans, the enclosure optimizes heat
transfer without the exchange of outside air and improves the MTBF for the enclosed electronics.
1.2. Feature Highlights
Ethernet Ports
• Up to 96 10/100TX + 2 10/100/1000TX copper ports
• Up to 48 100FX optical ports
• Up to 2 Gigabit Ethernet ports
• Long-haul optics allow distances up to 90km
• Multiple SFP optical connector types: ST, MTRJ, LC, SC
Cyber Security Features
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
RuggedRated™ for Reliability in Harsh Environments
• Immunity to EMI and high voltage electrical transients:
• Zero-Packet-Loss Technology
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial environment)
To Next Page
Loading...
Need help?
General
