声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
40
method is similar to storage output current value setting. Press encoder
potentiometer to return, and the data will be automatically saved.
1.4.2.8 System Information
System information operation video：https://youtu.be/Um4NQObeeJE
You can press SHIFT + MENU to enter the system setting menu, and then press
the right button three times to enter the system information menu as shown above.
You can view the SN number, firmware version and system temperature here.
To Next Page
Loading...
Need help?
General
