Ruijie Reyee RAP6260-D - Ports and LED Indicators

Hardware Installation and Reference Guide Product Overview
3
Ports and LED
Figure 1-2 Ports
Table 1-2 Ports
No.
Ports
Description
1
DC Connector
48 V DC/1 A input
2
Ethernet/PoE
Port
100/1000/2500Base-T Ethernet ports, PoE-capable
3
Reset Hole
The Reset hole is near the Ethernet/PoE port.
Stick the pin to the Reset hole: Restart the access point.
Press and hold the pin to the Reset hole for more than 5 seconds:
Restore the access point to factory settings.
4
SFP Port
1000Base-X SFP port (The SFP transceiver is an optional accessory.)