Hardware Installation and Reference Guide Installing the Access Point
12
3 Installing the Access Point
Caution
Before installing the access point, make sure you have carefully read the requirements in Chapter 2.
3.1 Installation Flowchart
Start
Prepare for Installation
Site?
Install the Access Point
Adjust Orientation
Finish
Installing a Mounting Plate
Assembly on a Wall
Installing a Mounting Plate
Assembly on a Pole
(Horizontal or Vertical)
Wall Pole
Connect Cables
3.2 Before You Begin
Carefully plan and arrange the installation position, networking mode, power supply, and cabling before
installation. Confirm the following requirements before installation:
The installation site provides sufficient space for proper ventilation.
The installation site meets the temperature and humidity requirements of the access point.
The power supply and required current are available in the installation site.
The selected power supply modules meet the system power requirements.
The installation site meets the cabling requirements of the access point.
The installation site meets the site requirements of the access point.
To Next Page
Loading...
Need help?
General
