Web-based Configuration Guide Fast Internet Access
6
2.3.2 Configuration Steps
⚫ Extend the Wi-Fi of Reyee router by using the Reyee Mesh function: Press the Reyee Mesh button of
the Reyee router for automatic networking. For details, see 2.1 .
⚫ Extend the Wi-Fi of WPS-supported router: Press the WPS button of the primary router and then the
Reyee Mesh button of the mesh repeater for networking. For details, see 2.1 .
⚫ Extend the Wi-Fi of other routers: Click Configure. The wireless repeater mode and wireless ISP mode
are available.
(1) Select Wireless Repeater or WISP.
⚫ Wireless repeater mode: Click Wireless Repeater, select the Wi-Fi of the primary router, and enter the
Wi-Fi password of the primary router to connect to the Wi-Fi.
In the wireless repeater mode, the device extends Wi-Fi signals and disables its DHCP function. When
clients connect to the wireless network, the primary router assigns addresses for them. When the device in
the wireless repeater mode extends the network of primary router, the WAN interface is unchanged. If you
connect the network cable to the WAN interface, the device automatically switches to the wired repeater
mode.
To Next Page
Loading...
General