Web-based Configuration Guide Overview
1
1 Overview
The EW1200R mesh repeater uses circular binaural antennas to support 2.4 GHz and 5 GHz dual bands and is
equipped with two independent signal amplification chips. It can extend the dual-band Wi-Fi coverage. The
maximum wireless rate of the entire device is 1200 Mbps. The EW1200R can extend the signals of other
devices, and can also connect to the Internet independently.
The signals that the EW1200R can extend are:
⚫ Wi-Fi of any model from Ruijie.
⚫ Wi-Fi of other vendors' devices. The compatibility problem may exist.
⚫ Open hotspots such as CMCC, Chinanet and merchant stores. The repeater function may be forbidden.
Such signals may fail to be extended. In addition, open networks have security risks, so it is not
recommended to extend such signals.
Caution
The supported encryption types include WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK. If you want to
extend encrypted signal, please enter the correct Wi-Fi password.
1.1 Network Interface
In the factory settings state, the network interface works in WAN mode, which can be connected to an optical
modem as a router. In this situation, you cannot log in to the web page of the mesh repeater through the
network interface. To log in to the web page of the mesh repeater, connect to the Wi-Fi of mesh repeater.
To Next Page
Loading...
General