Web-based Configuration Guide FAQ
46
6 FAQ
6.1 How Can I Restore the Factory Settings?
Press and hold the Reyee Mesh button for more than 5 seconds. When the indicator starts blinking, the
device is restoring the factory settings. The device will automatically restart after the restoration is completed.
After the device is started, that is, the indicator is solid on, reconfigure the Internet access. The wireless signal
name in the factory settings is @Ruijie-sXXXX.
6.2 How Can I Do If I Forgot the Password of Mesh Repeater?
⚫ Forgot the management password of the web page: You can try to log in with the Wi-Fi password. If the error
still occurs, restore the factory settings.
⚫ Forgot Wi-Fi password: If the mesh repeater is configured to extend the signals of other routers, the Wi-Fi
password is usually the same as the primary router's password. You can check the configuration of the
primary router. If the Wi-Fi password of the primary router is incorrect, you can restore the factory settings
and reconfigure the password.
6.3 How Do I Manage the Mesh Repeater After Installation Is
Successful?
You are advised to use the Reyee Router App to manage the mesh repeater, or you can access the mesh
repeater's IP address in a browser to manage it (the default address is 192.168.110.1). When working as a
mesh repeater, the device obtains a new IP address. In this situation, the default address cannot be accessed.
You are advised to manage the mesh repeater by using the Reyee Router App.
To Previous Page
Loading...
General