15
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
800.764.1028 sales@rearviewsafety.com
www.rearviewsafety.com
• Without special mode such as auto scan or trigger function turned on, and when in split view display
(not PIP1/2/3 or SP), single touch one of the channel to enter single view display of the channel, and
touch again to enter split view.
• Without special mode such as auto scan or trigger function turned on, and when it’s split view
display (not PIP1/2/3 or SP), double touch dierent channels will pop up a green semitransparent
box, and when the fingers leave the screen, the two channels will exchange the position. If the
channel that you want for exchange is not displayed, you may move the touch point to the top of the
screen, and the hidden channel will show up.
• Without special mode such as auto scan or trigger function turned on, and when it’s split view
display (not PIP1/2/3 or SP), double touch same channels will pop up a red semitransparent box for
choosing audio output channel.
• Without special mode such as auto scan or trigger function turned on, without menu, and when in
single view display, double touch the screen to pop up the red box, increase or shorten the distance
between the two points to enlarge/shrink the red box.
• Click the area inside the red box to magnify the selected area. When entering the amplified image,
the single point dragging can move the image. Single click the magnified image to go back to the
normal size. Click the area outside the red box to exit the magnified mode.
To Next Page
Loading...
General