24
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
800.764.1028 sales@rearviewsafety.com
www.rearviewsafety.com
6.2.7.4 TRIGGER
Touch Screen Instructions:
• Touch any of “Delay” line to activate digital input box; Touch any of “Priority” line to activate digital
selection box. Touch any of “Display” line to activate interface to select display images.
IR Instructions:
• LANG: Switch system language.
Feature Instructions:
• Delay: Trigger display image duration after trigger signal is disappeared, ranging from 0 to 60
seconds.
• Priority: Settings of trigger priorities. Trigger in higher priority can interrupt lower priority trigger. The
range of the priorities is 1 to 4. The smaller the number, the higher the priority.
• Display: Settings of corresponding trigger display image.
Other Instructions:
• Trigger function can interrupt auto scan function.
• When the trigger signal is received, the monitor will switch into the trigger display image
automatically and resume the previous state before the trigger occurs after delay time.
• Support trigger detection in standby mode.
To Next Page
Loading...
General