7
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
800.764.1028 sales@rearviewsafety.com
www.rearviewsafety.com
PRECAUTIONS
Operating Precautions
1. Do not expose the monitor to excessive heat or coldness. Storage temperature
is -30~+80°C; Operating temperature is -20~+70°C; with a maximum relative
humidity of 90%.
2. Never use this device near a bathtub, wash basin, kitchen, damp basement,
swimming pool or similar places.
3. Never use this device in the environment with excessive moisture, dust or
smoke.
4. Avoid dropping or striking.
5. Never use this device in enclosed spaces, areas with excessive vibration or
subject to severe impacts.
6. Never puncture, scratch, or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2" space between the monitor and walls, glass or other objects
to allow adequate air circulation around the device.
9. This monitor is not designed to be waterproof.
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle
electrical system.
2. Make sure all cables are correctly connected. Observe polarity. Improper cable
connections may damage the monitor. Remove the power cable connections when
you do not intend to use the device.
1. High voltage is present within the monitor. Opening monitor case
should only be performed by professionals.
2. Do not watch any video while driving unless you are monitoring
rear view camera display.
Occasionally, a few highlights or dark spots may occur on the LCD
screen. That is a very common phenomenon in active matrix display
technology, and it doesn’t necessarily indicate any defects or faults.
To Next Page
Loading...
General