Ryze wave - Setting Screen-On Duration; Setting Always-On-Display (AOD); Screen Lock; Screen Wake

15
2.3.4 SETTING SCREEN-ON DURATION
Swipe down on the smartwatch home screen to reveal
the quick settings panel. Find and tap the
Settings
icon. Tap Display. Tap Screen-on Duration Choose a
setting and tap
to confirm selection.
To keep the display turned on, set Screen-on Duration
to Never. Keeping the screen turned on continuously will
drain the battery power faster.
2.3.5 SETTING ALWAYS-ON-DISPLAY (AOD)
Once AOD is enabled, the AOD watch face will stay on
after your smartwatch enters standby mode. To enable
this feature, swipe down on the smartwatch home
screen to reveal the quick settings panel. Find and tap
the
Settings icon. Tap Watch Faces & Themes. Turn
on/o the setting for Always-On Display.
Keeping the AOD watch face on continuously will drain
the battery power faster.
2.3.6 SCREEN LOCK
Swipe down on the smartwatch home screen to reveal
the quick settings panel. Tap
to toggle the screen
lock feature on/o. To unlock the screen, press and hold
the upper button.
2.3.7 SCREEN WAKE
Screen Wake allows you to turn on the smartwatch
home screen simply by raising your wrist. There are two
ways to enable this function.
Method 1:
Swipe down on the smartwatch home screen to reveal
the quick settings panel. Tap
to toggle the feature on
or o.
Method 2:
Swipe down on the smartwatch home screen to reveal
the quick settings panel. Find and tap the
Settings
icon. Tap Display and toggle the Raise to Wake switch
to turn it on and o.
2.3.8 SETTING VIBRATION STRENGTH
Swipe down on the smartwatch home screen to reveal
the quick settings panel. Find and tap the
Settings
icon. Tap Sound & Vibration. Tap Vibration Strength.
Swipe the screen/up to choose a setting and tap
to
confirm selection.