22
On iOS phones:
• Go to phone Settings > Bluetooth. Wait for the
phone to search for nearby Bluetooth devices.
Under the Other Devices list, look for and tap on
Ryze Wave to complete Bluetooth pairing with
the smartwatch.
4) Enabling proper access and permission for the App:
On Android phones:
• Go to phone Settings > Apps > Ryze Fit and
make the following settings for the App. Tap
Permissions, allow permission for Phone, Contacts
and Call logs. Tap Battery or App battery use
and ensure Unrestricted is enabled.
On iOS phones:
• Go to phone Settings > Ryze Fit > Contacts and
turn on the switch.
5) Open the Ryze Fit App. Go to Device tab. Tap Call
Reminder. When prompted, enable phone call
permissions. Tap on screen to enable call reminder.
Then tap
to save the setting.
6) Disable Do Not Disturb (DND) mode on the
smartwatch.
7) Disable Low Power mode on the smartwatch.
2.5.4 SETTING CALL CONTACTS
Setting up frequent contacts with the Ryze Fit App
1) Open the Ryze Fit App and go to the Device tab.
Tap Address Book.
2) In the following screen, tap Open.
3) Select the contacts you wish to add. Tap Done.
Tap Load. Tap
to return to the previous screen.
The newly added contacts will be synced to the
smartwatch under Phone > Contacts.
2.5.5 CALLING A CONTACT
You can make a phone call from the smartwatch when
it is connected to your smartphone with the Ryze Fit
App running in the background. Ensure all steps in the
“Setting Incoming Call Alert” section are completed.
To make a call, swipe right on the smartwatch home
screen to reveal the applications list. Tap Phone then
dial the number using the Dialpad or by tapping on a
contact name in Contacts or in the Call History.
To Next Page
Loading...