Ryze wave - Viewing Spo2; Stress; Automatic Stress Monitoring

29
2.9.2 VIEWING SpO2
Method 1:
Open the Blood Oxygen application on the smartwatch
to view heart rate. Swipe up from the edge of the
screen to reveal more recorded data.
Method 2:
View the Blood Oxygen card in the Home tab in the
Ryze Fit App. Sync the smartwatch data to the App
by swiping down the phone screen whilst at the Home
tab. Tap on the card title “Blood Oxygen” to view more
analysis.
2.10 STRESS
Stress is an indicator of your physiological strain. The
smartwatch can measure your stress level by way
of calculating a stress score through the analysis of
heart rate variability (HRV) and other physiological
data. A stress score ranges from 1 to 100. The lower the
score, the lower your stress level. To ensure accuracy
of measurement, wear the smartwatch at least one
finger's width above your wrist bone and make sure it
is snug on your wrist. During the measurement, keep
your arm and wrist still and wait patiently until the
measurement finishes.
2.10.1 AUTOMATIC STRESS MONITORING
To enable automatic stress monitoring, open the Ryze
Fit App and go to the Device tab. Tap Stress settings.
In the following page, turn on the switch for
auto-measurement. Set the timing. Tap
to save the
setting.
Automatic stress monitoring will increase battery
consumption of your smartwatch.