Ryze wave - Viewing Heart Rate; BLOOD OXYGEN LEVEL (Spo2); Automatic Spo2 Measurement

28
2.8.5 VIEWING HEART RATE
Method 1:
Open the Heart Rate application on the smartwatch to
view heart rate. Swipe up the screen to reveal more
recorded data.
Method 2:
View the Heart Rate card in the Home tab in the Ryze
Fit App. Sync the smartwatch data to the App by
swiping down the phone screen whilst at the Home tab.
Tap on the card title “Heart Rate” to view more analysis.
2.9 BLOOD OXYGEN LEVEL (SPO2)
Blood oxygen level (SpO2) is a percentage measure
of the blood oxygen-carrying capacity of your blood
and a vital physiological indicator of your respiratory
system. To ensure accuracy of measurement, wear the
smartwatch at least one finger’s width above your wrist
bone and make sure it is snug on your wrist. During the
measurement, keep your arm and wrist still and wait
patiently until the measurement finishes.
2.9.1 AUTOMATIC SpO2 MEASUREMENT
To set up automatic measurement for SpO2, open
the Ryze Fit App and go to the Device tab. Tap Blood
oxygen settings. In the following page, turn on the
switch for auto-measurement. Set the timing. Tap
to
save the setting.
Automatic Sp02 measurement will increase battery
consumption with your smartwatch.