Saftronics HPVFE - Acceleration;Deceleration Control; Accel;Decel Rate Selection Methods

Sailer Manual HPVFE
24
Accel/Decel Selection
The selection of Accel/Decel rates can be made through digital inputs, RS485 (DSI) communications an d /or
param e t e rs .
Joginpu
Enable and
P109 [Accel Time 1]/P110
[Decel Time 1]
Are used.
Yes
A405 [Jog Accei/Decel]
used.
Active when
Yes A401[Accel Time 2]/A402
[Decel Time 2]
is selected by RS485(DSI) .
A401 [Accel Time 2]/ A402 [Decel
Time 2] is active when input is
active
P109[Accel Time 1]/P110[Decel Time
A401[Accel Time 2]/A402 [Decel Time
Yes 2]
Determined by the active Preset
Frequency .
On page 3-21