Sailer Manual HPVFE
34
Display Group
d001 [Output Freq]
Related Parameter(s): d002, d010, P104, P105, P108
Output frequency present at T1, T2 & T3 (U, V & W).
Values
Default
Read Only
Min/Max:
0.0/P105 [Maximum Freq]
Display:
0.1 Hz
d002 [Commanded Freq]
Related Parameter(s): d001, d013, P104, P105, P108
Value of the active frequency command. Displays the commanded frequency even if the drive is not running.
Important:
The frequency command can come from a number of sources. Refer to Start and Speed Reference Control on page 1-19 for
details.
Values
Default
Read Only
Min/Max:
0.0/P105 [Maximum Freq]
Display:
0.1 Hz
d003 [Output Current]
The output current present at T1, T2 & T3 (U, V & W).
Values
Default
Read Only
Min/Max:
0.00/(Drive Rated Amps x 2)
Display:
0.01 Amps
d004 [Output Voltage]
Related Parameter(s): P101, A453, A457
Output voltage present at terminals T1, T2 & T3 (U, V & W).
Values
Default
Read Only
Min/Max:
0/Drive Rated Volts
Display:
0.1 VAC
d005 [DC Bus Voltage]
Present DC bus voltage level.
Values
Default
Read Only
Min/Max:
Based on Drive Rating
Display:
1 VDC
To Next Page
Loading...