EasyManua.ls Logo

Sagem D86C - Economy Mode; Handset Name; Language; Resetting the Handset (Default HS)

Sagem D86C
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
SETTINGS
Economy Mode
-Press On/Off button to set Economy mode on/off.
Handset Name
-Press OK to enter handset name writing.
- Key in name.
-Press OK to confirm and save.
Language
-Press OK to choose the desired language from the language list.
- Press Up or Down button to select the language.
-Press OK to confirm and save.
Resetting the handset (default HS)
When you reset your handset, all the parameters are reset to their initial value (factory
settings).
-Press OK, Confirm icon appear on the display.
-Press OK to confirm.
Room monitor
You can use your handset to monitor a room. This allows you, for example, to monitor a baby's
room.
To do so, place one of the handsets in the room to be monitored. This unit will be in "sender"
mode.
The other handset will remain with you, it is in "receiver" mode.
-Press OK, "Call To" will appear on the display.
- Key in another handset number that had registered to the same base.
-Press OK, "Intercom" will appear on the display.
- After set first handset to Room Monitor On, the other handset will ring while first handset
receives some voice.
- Press Talk or Speaker On/Off key on the other handset to monitor first handset.
Réglages.fm Page 26 Vendredi, 3. août 2007 10:21 10

Table of Contents

Related product manuals