28
SETTINGS
Default BS
When you reset your base, all the base parameters are reset to their initial values (factory
settings).
-Press OK, Confirm icon appear on the display.
-Press OK to confirm.
Flash Time
If you connect your telephone to a private automatic branch exchange or use it in a foreign
country, you may need to modify the flash duration in order to use your telephone correctly
with regard to the following functionalities: call waiting, 3 way calling.
Contact your provider, who will supply the appropriate time period, and proceed to the new
settings.
-Press OK.
- Press Up or Down button to select 80/250/600ms flash time.
-Press OK to confirm and save.
Pause Time
You can insert a pause in the dialling sequence.
-Press OK.
- Press Up or Down button to select 0/1/2/3/4s pause time.
-Press OK to confirm and save.
Call log
-Press OK to select All Call or Missed Call.
-Press OK to confirm and save.
Note: If "Missed Call" is selected, the following criteria will be considered during "Call Waiting
CID"(1st call + incoming 2nd call with CID): No action (Ignore the 2nd call and continue
conversation with 1st call): 2nd call will be missed calls and displayed on the CID list,
Answer the 2nd call and on-hold/ end 1st call: 2nd call will not be missed calls and will
not displayed on the CID list.
If "All Call" is selected, the following criteria will be considered during "Call Waiting CID"
(1st call + incoming 2nd call with CID): No action (Ignore the 2nd call and continue
conversation with 1st call): 2nd call will be displayed as new calls in the CID list.
LU 252976139A D86C EN.book Page 28 Vendredi, 3. août 2007 9:56 09
To Next Page
Loading...
Need help?
General
