The recipient can now type in a message for you. The message will appear
in the field just below your message.
6. When the recipient has placed the [OVER] command too, you can type
more text to continue the conversation.
7. To end the telex session, select B
reak. If you do not want to wait for
exchange of DE/WRU, you can select B
reak now! in the popup that appears
after B
reak is selected.
The call is then disconnected. You can see all telex sessions initiated by
you under S
ent Items in the Message page. See Viewing Sent items on
page 26.
If the remote station forces an OVER on your part while you are
transmitting data, 1-2 characters may incorrectly be marked has
having been sent while the remote station may not have received
these characters. We do not recommend forcing a change of
direction while the other station is sending data.
To Next Page
Loading...
