Chapter 2: Using the system
20 Making a telex call
Options in the telex page
Buttons
The table below shows the functions of the buttons that can appear at the
bottom of the page:
Button Function
Transmits the text you have typed in the text line at the
bottom.
(ARQ only) Changes direction, so the recipient can write
back. You cannot send any text after an Over command,
until the direction is changed back to your side.
However, if you send more text while the OVER command is
waiting to be sent, the OVER is removed and replaced by
your new text.
Transmits your answer back string.
The answer back string is stored in the MF/HF radio during
installation, using the Identification window in the
Message Terminal (System > Settings > Identification).
In Call settings you can set up the system to automatically
send DE/WRU (S
ystem > Settings > Call settings).
To Next Page
Loading...
