SAJ R5 Series User Manual

R5 Series
- 53 -
(4) Error message on eSolar Portal ( if available ) or any information which would
be helpful to determine the defect.
(5) Detailed information about the entire system (battery, circuits, etc.).
Documentation of previous claims/exchanges (if applicable).
1.4 After receiving above information, SAJ will decide how to proceed the
service
• Repaired by SAJ factory, or SAJ authorized service center overhaul.
• Repaired on-site by SAJ Service Center.
• Offer a replacement device of equivalent value according to model.
In the case of an exchange, the remaining portion of the original warranty period will
be transferred to the replacement device. You will not receive a new certificate, as
your entitlement is documented at SAJ. While the original model stop producing or
out of stock, SAJ will provide new model type of inverter or an equivalent value
product.
If the inverter needs to be replaced following assessment, SAJ will send a
replacement unit immediately. The defective inverter should be sent back to the
closest SAJ Service Center by packing in its original package if possible. SAJ keeps
the right to accomplish the warranty service works via SAJ authorized service
partner.
1.5 Service after Warranty Expiration
If the inverters for maintenance are out of warranty, SAJ charges an on-site service
fee, parts, labor cost and logistic fee to end-user. Detailed standard refers to the
listed table.
Item
Return to Factory for
Maintenance
On-site Maintenance
Without parts
replacement
Labor + Logistic fee
(to & from SAJ)
Labor + On-site attendance
fee
With parts replacement
Labor + Parts + logistic fee
(to & from SAJ)
Labor + On-site attendance
fee + Parts
■ On-site attendance fee: Cost of travel and time for the technician in attending

SAJ R5 Series Specifications

General

MPPT	Yes
Display	LCD
Number of MPP Trackers	2
Cooling Method	Natural convection
Type	Grid-tied Inverter
Communication	WiFi, Ethernet, RS485
Operating Temperature Range	-25°C ~ +60°C
Output Voltage Range	230V