23: PLC status reset
24: Swing pause
25: Counter input
26: Counter reset
27: Length count input
28: Length reset
29: Torque control prohibited
30: Pulse input (only valid for DI6)
31: Reserved
32: Immediate dc braking
33: External faults often closed input
34:frequency setting effect terminal (this
terminal function is not set, the default is valid)
35: Reverse PID action direction
36: External stop terminal 1
37: Command source switchover terminal 1
38: PID integral pause
39: Frequency source X and preset
frequency
switchover terminals
40: Frequency source Y and preset
frequency
switchover terminals
41 ～ 42: Reserved
43: PID parameter switchover terminal
44: User-defined fault 1
45: User-defined fault 2
46: Speed control/torque control
switchover
47: Emergency stop
48: External stopping terminal 22
49: Deceleration dc braking
50: Clear the current running time
51: Timing enable
52: Timed reset
53～59: Reserved
To Next Page
Loading...
