Sako SKI600 - Page 33

027
D Group - Monitoring Parameter Group and Fault Record
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
d-24 Current stage of multistage speed 0～15 1 0 ◆
d-25 reserved — — 0 ◆
d-26 reserved — — 0 ◆
d-27 Current count value 0 ～ 65535 1 0 ◆
d-28 Set count value 0 ～ 65535 1 0 ◆
d-29 Current timing value(S) 0 ～ 65535s 1S 0 ◆
d-30 Set timing value(S) 0 ～ 65535s 1S 0 ◆
d-31 Current length 0.000 ～ 65.535(KM) 0.001KM 0.000 ◆
d-32 Set length 0.000 ～ 65.535(KM) 0.001KM 0.000 ◆
d-33 Radiator Temperature 1 0.0℃～ +110.0℃ 0.1℃ 0.0 ◆
d-34 Radiator Temperature 2 0.0℃～ +110.0℃ 0.1℃ 0.0 ◆
d-35
accumulative run time of VFD
(hour)
0 ～ 65535H 1H 0 ◆
d-36
accumulative power-on time of
VFD (hour)
0 ～ 65535H 1H 0 ◆
d-37
accumulative run time of fan
(hour)
0 ～ 65535H 1H 0 ◆
d-38
Accumulative electricity
consumption (low order digit)
0 ～ 9999KWH 1KWH 0 ◆
d-39
Accumulative electricity
consumption (high order digit)
0～9999KWH（*10000） 1KWH 0 ◆
d-40
Special model monitoring
parameter (reserved)
— — 0 ◆
d-41
Special model monitoring
parameter (reserved)
— — 0 ◆
d-42
Special model monitoring
parameter (reserved)
— — 0 ◆
d-43
Special model monitoring
parameter (reserved)
— — 0 ◆
4.0 Monitoring Parameter Group and Fault Record