Sako SKI600 - Page 39

033
4.1 Function Code
F0 Group - Basic Run Parameters
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
F0.18
Frequency output
mode
0: low frequency mode
(0.00 ～ 300.00Hz)
1: high frequency mode
(0.0 ～ 3000.0Hz)
Note: high frequency mode is
only e󽗈ective to VF control
1 0 ×
F0.19 Acceleration time 1
0.1 ～ 3600.0s
0.4 ～ 4.0KW 7.5s
5.5 ～ 30.0KW 15.0s
37.0 ～ 132.0KW 30.0s
160.0 ～ 630.0KW 60.0s
0.1s
Depending
on model
○
F0.20 Deceleration tima 1 0.1s
Depending
on model
○
F0.21 Running direction
0: forward
1: reverse
2: prevent reversing
1 0 ×
F0.22 Carrier frequency
1.0 ～ 16.0KHz
0.4 ～ 4.0KW 6.0KHz
1.0 ～ 16.0KHz
5.5 ～ 30KW 4.0KHz
1.0 ～ 16.0KHz
37 ～ 132KW 2.5KHz
1.0 ～ 10.0KHz
160 ～ 630KW 1.5KHz
1.0 ～ 5.0KHz
0.1KHz
Depending
on model
○
F0.23 User password
1: 0 ～ 9: no password
protection
2: The password setting is
successful and will take 3
minutes to take e󽗈ect
3: Write protection is not
valid for this parameter and
cannot be initialized
1 0 ○