Sako SKI600 - Page 51

045
4.1 Function Code
F6 Group - Analog Quantity and Pulse Input and Output Parameters
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modi󽗉cation
F6.09 AI2 input upper limit 0.00V ～ 10.00V 0.01V 10.00 ○
F6.10
AI2 upper limit
corresponding
physical quantity
setting
-200.0% ～ 200.0%
note: range is relevant to
P6.00
0.1% 100.0% ○
F6.11 AI2 input 󽗉ltering time 0.00s ～ 10.00s 0.01s 0.05 ○
F6.12
Error limit of analog
input
0.00V ～ 10.00V 0.01V 0.00 ○
F6.13
Threshold of zero freq.
operation
Zero freq.
hysteresis ～ 50.00Hz
0.01Hz 0.00 ○
F6.14 zero freq. hysteresis
0.00 ～ zero freq. threshold
value
0.01Hz 0.00 ○
F6.15
External impulse
input corresponding
physical quantity
0: speed command (output
freq., -100.0% ～ 100.0%)
1: torque command (output
torque, 200.0% ～ 200.0%)
1 0 ×
F6.16
External impulse input
lower limit
0.00 ～ 50.00KHz 0.01KHz 0.00 ○
F6.17
External impulse
input corresponding
physical quantity
-200.0% ～ 200.0%
note: range is relevant to
P6.15
0.1% 0.0% ○
F6.18
External impulse input
lower limit
0.00 ～ 50.00KHz 0.01KHz 50.00 ○
F6.19
external impulse lower
limit corresponding
physical quantity set
-200.0% ～ 200.0%
note: range is relevant to
P6.15
0.1% 100.0% ○
F6.20
external impulse input
󽗉ltering time
0.00 ～ 10.00s 0.01s 0.05 ○