Need help?Do you have a question about the Saleae Logic 8 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Digital Sample Rate | 100 MS/s |
| Analog Sample Rate | 10 MS/s |
| Analog Bandwidth | 5 MHz |
| Analog Resolution | 12 bits |
| Input Impedance | 1 MΩ || 10 pF |
| Connectivity | USB 2.0 |
| Operating System Compatibility | Windows, macOS, Linux |
| Power Supply | USB Powered |
| Logic Level | 1.2V to 5.5V |
| Digital Voltage Range | 0V to 5.5V |
| Supported Protocols | I2C, SPI, UART, CAN |
Covers isolation, voltage limits, ground current safety, and loop identification.
Guides on obtaining and installing the Saleae Logic software for different operating systems.
Step-by-step guide to connect the logic analyzer hardware to the computer.
Guides on starting captures and configuring device settings like sample rate and channels.
Explains setting up edge and pulse width triggers to capture specific events.
Details methods for managing capture files and exporting data in various formats.
To Next Page
