Need help?Do you have a question about the Saleae Logic and is the answer not in the manual?
General| Operating System Compatibility | Windows, macOS, Linux |
|---|---|
| Power Supply | USB powered |
| Input Impedance | 1 MΩ |
| Interface | USB 2.0 |
| Supported Protocols | CAN, I2C, SPI |
| Channels | 8 |
Explains that Saleae Logic analyzers and their channels are not electrically isolated from each other or the PC.
Details maximum voltage ranges and cautions for connecting to high voltages to prevent damage.
Discusses risks associated with ground loops and how they can damage equipment.
Methods to test for and identify potential ground loops using a multimeter.
Information on the standard 3-year warranty for Saleae products and troubleshooting broken hardware.
Overview of the main sections of the Saleae Logic software user interface.
Step-by-step instructions for connecting the Saleae Logic analyzer to a computer via USB.
Guidance for users experiencing difficulties with calibration file downloads or updates.
Instructions on how to start and stop data captures using the Saleae Logic software.
Guide to adjusting capture settings like sample rate, duration, channels, and voltage in the software.
How to set up triggers based on rising or falling digital edges for capturing specific events.
Setting up triggers based on the duration a signal remains high or low.
How to view and save real-time measurements on digital waveforms by hovering or right-clicking.
How to view and save real-time measurements on analog waveforms by hovering or right-clicking.
Steps to place and use timing markers (A1, A2) to measure time differences in data.
How to save current position and zoom level as a bookmark for quick return.
Adding permanent measurement annotations for complex calculations and later reference.
Instructions on how to save the current capture tab and its settings in the Saleae software.
How to load previously saved capture files into the Saleae Logic software.
Guide to exporting captured data in various formats for use in other applications.
How to export data in CSV format, including options for timestamps, bit columns, and change records.
How to add protocol analyzers from the Analyzers sidebar in the Saleae software.
How to specify input channels and adjust settings for different protocol analyzers.
How to interpret and view decoded data displayed on waveforms and in the Decoded Protocols list.
How to search for specific results within the decoded protocols list.
How to limit protocol search results to a specific time range using timing markers.
To Next Page
