Salus iT500TR User Manual

iT500 - FULL USER MANUAL

Salus iT500TR Specifications

General

Mounting	Wall-mounted
Display	LCD
Control Method	Touchscreen
Power Source	Mains
Programmability	Yes
Temperature Range	5°C
Mobile App	Yes
Power Supply	230V AC
Operating Temperature	0°C

Summary

Introduction

Safety Information and Warnings

Provides essential safety precautions for installation, usage, and general warnings for the device.

Thermostat Location Guidelines

Connection Description

Single Heating Zone Wiring Diagrams

Illustrates hydraulic and electric wiring diagrams for boiler and pump control in single heating zones.

Single Zone & Hot Water Timer Wiring

Two Heating Zones Wiring Diagrams

iT500RX Receiver Switches and LEDs

The pairing processes of the iT500 devices

Pairing iT500TR with iT500RX

Instructions for pairing the iT500TR thermostat with the iT500RX receiver.

Pairing iT300 with iT500TR

App Registration Process

App Interface: DHW Control

Thermostat Modes

Heating Zone Schedule Setup

Instructions for setting up heating schedules with different time intervals and temperature levels.

Hot Water Schedule Setup

Temporary Setpoint Override

Manual Operating Mode

Frost Protection Mode Activation

App: Switching Heat/Cool Mode

Holiday Mode Configuration

Factory Reset and App Removal

Installation in OFFLINE MODE

Identify System Type for Offline Install

Offline System Configuration

Operating in OFFLINE MODE

Offline Operating Modes

Manual Mode: Adjusting Setpoint

Schedule Mode

Offline Schedule: Heating Zone

Detailed steps for creating and managing heating schedules directly on the thermostat.

Offline Schedule: Hot Water System

Offline Temporary Override

User Settings

User Settings: Heat/Cool Mode

Steps to change the thermostat's operating mode between heating and cooling.

User Settings: Hysteresis (SPAN)

User Settings: Display Accuracy

Thermostat Calibration (OFFS)

Troubleshooting: Error Codes