Salus iT500TR - Thermostat Calibration (OFFS); Troubleshooting: Error Codes

47
1
Using button search thermostat
calibration option. Conrm by
button.
8.6.7 Thermostat calibration (OFFS)
9. Error codes
Thermostat calibration is a function which allows user to recalibrate internal thermostat’s temperature sensor by a given number of degrees (in the range
from -3,0 °C to 3,0 °C in 0,5 °C steps). To calibrate thermostat’s temperature sensor please follow steps below:
Error code will appear only when iT500TR thermostat is set for two zones operation and iT300 sensor is not paired or distance between iT500 and iT300 is
too big and connection is broken. The following error will then be displayed on the thermostat screen and in the app:
To solve it, you have to pair iT300 thermostat and set the two zone thermostat operation mode again. Error will disappear.
Press the power button
to highlight the display.
1
Press and hold and
buttons for 3 sec.
2 3
1
2
Use or buttons to
set temperature calibration value.
Conrm your choice by button.
Thermostat will go back to the
main screen.
DEVICE VIEW: APP VIEW:
1
4 5