Sam4s ER-180U - Program 530 - DEPARTMENT Descriptor Programming

46
•
Service Mode Programming ER-180U
Clear Total
1. Move to the S-Mode.
2. To Reset Total, enter 20, and then press the SBTL key.
0
SBTL
2
Clear Grand Total
1. Move to the S-Mode.
2. To Reset Grand Total, enter 30, and then press the SBTL key.
0
SBTL
3
EPROM Information
1. Move to the S-Mode.
2. To Scan EPROM Information, enter 50, and then press the SBTL key.
0
SBTL
5