ER-180U Program Mode Programming
55
Program 520 - DEPARTMENT Price/HALO Programming
If a DEPARTMENT is open, set the HALO (high amount lock out) here. If a
DEPARTMENT is preset set the preset price here.
1. Move to the PGM-Mode.
2. To begin the program, enter 5 2 0, press the SBTL key.
3. Select the DEPARTMENT or DEPARTMENTs you wish to program in one of the
following ways:
• Press a DEPARTMENT key on the keyboard, or
• For programming from DEPT1 to DEPT16 with same status, press as below..
4. If the DEPARTMENT is open, enter a HALO of up to 7 digits. If the
DEPARTMENT is preset, enter a preset price. (The maximum preset price you
can enter is $50,000.00.)
5. To program additional DEPARTMENTs, repeat from step 3, or press the CASH
key to finalize the program.
To Next Page
Loading...
