Sam4s ER-180U - Machine Number Programming

82
•
Program Mode Programming ER-180U
Machine Number Programming
The machine number is printed on the register receipt. Program a machine number so that any receipt
can be identified with the store or register where the transaction took place.
Programming the Machine Number
1. Move to the PGM-Mode.
2. To begin the program, enter 1 6 0 0, press the SBTL key.
0
SBTL
0
6
1
3. Enter a machine number (up to 6 digits); press the X/TIME key.
X/TIME
4. Press the CASH key to finalize the program.
CASH