Sam4s ER-180U - System Option Programming

ER-180U Program Mode Programming
•
63
System Option Programming
Refer to the “System Option Table” to review the system options. Read each option carefully to determine if you wish
to make any changes.
Programming a System Option:
1. Move to the PGM-Mode.
2. Enter 3 0, press the SBTL key.
3. Enter a system option address, and then press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more
than one decision to be made in an address, add the values representing your
choices for each decision and enter the sum. Press the SBTL key.
5. Repeat from step 3 for each system option you wish to change.
6. Press the CASH key to end system option programming.
System Option Flowchart
SBTL
X/TIME
Status
CASH
Repeat for each
System Option
Option #
SBTL
0
3