Sam4s ER-180U - Date and Time Programming

ER-180U Program Mode Programming
•
81
Date and Time Programming
Use this program to set the clock and calendar on your ER-180U. The date changes automatically.
After initial setting, time changing will probably be required only for beginning and ending daylight
savings time.
Programming the Date and Time
1. Move to the PGM-Mode.
2. To begin the program, enter 1 3 0 0, press the SBTL key.
0
SBTL
0
3
1
3. Enter time in military standard time (based on 24 hours), must be four digits
(i.e. 1300 hours = 1:00 PM); press the X/TIME key.
M
X/TIME
M
H
H
4. Enter the date in MM (month) DD (day) and YY (year) format. Press the
X/TIME key:
Y
X/TIME
D
D
M
M
Y
5. Press the CASH key to finalize the program.
CASH